Motorola MTP850 S - Setting Time Offset; Setting Automatic Updates for the Time and Date; Energy Economy; Enabling Energy Economy

2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
Setting Time Offset
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Time Offset.
3 Enter time offset using NAVIGATION keys.
Note: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4 Press Done.
Setting Automatic Updates for the Time and Date
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider added or
subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time
slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.
Enabling Energy Economy
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
• On — Activates Energy Economy feature.
• Off — Deactivates Energy Economy feature.
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Energy Economy → EE Status.
3 The Energy Economy status is displayed as:
• Energy Ecnmy Is Supported By System
• Energy Economy Is Currently Not Supported By System
Main Menu | 87
| | Send Feedback