Icon Description
• No icon — during a radio to radio and gateway call.
General Icons
All Tones Off and Duplex and Simplex Ring Muted — Indicates that all alert tones are off
and both duplex an simplex ring volume is set to 0.
• Volume is set to 0 (when Volume Adj. Mode is set to Common).
• Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set to
Individual).
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring vol-
ume is set to more than 0.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring volume
is set to more than 0.
Vibrate On — Indicates that the radio vibrates to alert you of an incoming call.
Vibrate then Ring — Indicates that the radio vibrates and rings to alert you of an incoming
call.
Low Audio — Indicates that the audio mode is changed to low.
High Audio — Indicates that the audio mode is changed to high.
/ / /
/
Audio Profile Selected — Indicates that an audio profile associated with a particular icon is
active. The icons can be either solid or blinking. For details on audio profiles available on
the radio, contact your service provider.
Earpiece Connected — Indicates that the earpiece is connected.
GPS Icon
• Solid - the radio has a location fix
• Blinking - the radio is acquiring a location fix. This is an optional setting and may not be
enabled on your radio.
RUI Logged on — Indicates that you are logged on into the radio.
RUI Pseudo Log On — Indicates that you are in pseudo logged on state.
RUI Packet Data — Indicates Pseudo Log On state when the Packet Data feature is activated
and active data session is in progress.
RUI Packet Data — Indicates Pseudo Log On state when the Packet Data feature is activated
and the external device sets up data connection with the radio.
Battery Strength — Shows the charge of your battery.
Battery Charging — Indicates that the battery is charging.
Table continued…
Man-Machine Interface | 83
68015000878-G | | Send Feedback
To Next Page
Loading...
