61
Making a DMO Group Call via Gateway and Repeater
1. While in DMO, choose the Gateway and Repeater option
as described in “Selecting DMO Group Call via Gateway
and Repeater” on page 58.
2. Place the call for the selected talkgroup:
• If you press PTT while both gateway and repeater are
not available, you will start a DMO call without gateway
and repeater. The Gateway and Repeater icons will
disappear.
• If you press PTT while both gateway and repeater are
available, but the call is rejected by the gateway, a
repeater call will be attempted.
> If it is successful your MTP850 will display the
message Repeater Call and a call via repeater will
proceed. The Gateway icon will disappear.
> If it is not successful your MTP850 will display the
message MS-MS Call and a terminal to terminal call
will proceed. The Gateway and Repeater icons will
disappear.
• If you press PTT while both gateway and repeater are
available, a gateway call will be attempted.
> If it is successful your MTP850 will start a DMO call
with gateway. The Gateway icon will be solid. The
Repeater icon will disappear.
> If synchronising with a gateway is not successful a
repeater call will be attempted.
> If it is successful your MTP850 will display the
message Repeater Call and a repeater call will
proceed. The Gateway icon will disappear and the
Repeater icons will be solid.
> If it is not successful your MTP850 will display the
message MS-MS Call and a terminal to terminal call
will proceed. The Gateway and Repeater icons will
disappear.
To Next Page
Loading...
