Appendix B
LED Indications
Table 30: LED Status Indications
Indication Status
Solid green
• In use.
• Repeating call.
Blinking green
• In service or idle.
Solid red
• Out of service.
• Switching between modes, for example, DMO to TMO.
Blinking red
• Connecting to the network.
• Entering DMO.
Solid orange
• Radio is powering up.
• Transmit inhibit in service.
• Channel busy in DMO.
• Radio interference in DMO.
Blinking orange
• Incoming call.
No indication
• Radio powered down.
• Radio in Covert Mode.
Table 31: Battery Charging LED Indications
Indication
Status
Solid green Battery fully charged
Blinking green Battery charged at 90%
Solid red Rapid or trickle charge
Blinking red Faulty or invalid battery
Blinking orange Battery is waiting to charge
NOTICE:
When you charge your radio in a multi-unit charger and the battery is at the 90–100% charge
level, the LED indicators on the radio and on the multi-unit charger differs:
• LED on the radio – blinking green.
• LED on the multi-unit charger – solid green.
If you insert a radio with a deeply discharged battery into the multi-unit charger, the LED on the
radio shows blinking red, indicating a charging error. Resolve this error by reinserting the radio.
MN002033A01–AC (en-US)
LED Indications
Send Feedback 159