Icon Description
Direct Mode Call – Indicates that the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
or
High RF Power: receiving – Indicates High RF Power option is enabled and the ra-
dio is receiving a call.
Direct Mode – Indicates that radio is in Direct Mode (radio-to-radio communication).
Repeater Mode – Indicates that radio is operating as a repeater in Repeater Mode.
DMO Gateway Communication Mode – Indicates that gateway is selected. The icon
has the following status:
• Solid – when the radio is synchronized with the gateway.
• Blinking – when the radio is not synchronized or during attachment.
• No icon – during radio to radio and repeater call.
DMO Repeater Communication Mode – Indicates that the Repeater or GW + Rep
option in DMO Mode is selected. The icon has the following status:
• Solid – when the radio has detected the repeater (for example when the radio re-
ceives a presence signal).
• Blinking – when the radio has not detected the repeater or during attachment.
• No icon – during a radio to radio and gateway call.
General Icons
All Tones Off and Duplex and Simplex Ring Muted – Indicates that all alert tones are
off and both duplex and simplex ring volume is set to 0.
All Tones Off – Indicates that:
• Volume is set to 0 (when Volume Adj. Mode is set to Common).
• Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set
to Individual).
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
Low Audio – Indicates that the audio mode is changed to low.
High Audio – Indicates that the audio mode is changed to high.
Earpiece Connected – Indicates that the earpiece is connected.
GNSS Icon
• Solid – the radio has a location fix.
• Blinking – the radio is acquiring a location fix. This is an optional setting and may
not be enabled on your radio.
Table continued…
MN002033A01–AC (en-US)
Chapter 2: Getting Started
38 Send Feedback
To Next Page
Loading...
