Motorola MTX1550 - Programming the Radio; Programming the Telephone List Numbers

39
English
PROGRAMMING THE
RADIO
PROGRAMMING THE RADIO
This section outlines the programming functions of
your radio, and is only valid for Model II radios.
Throughout this section, the display below
is used to indicate the radio’s home display.
Programming the Telephone List Numbers
This feature lets you use the radio’s keypad to
change the telephone numbers assigned to any of
the telephone list members. Each phone number
can only have up to 16 digits.
To change the telephone list
1 Press / until PROG
is displayed.
2 Press l (the softkey
below PROG).
3 Press ; (the softkey
below PHON). The
display shows the first
programmable member
of the telephone list.
PLANT POLICE
PROG
SCAN
PHON
CALL
FIRE DEPT
4 Press / or ,,
—or—
Use the keypad to enter the desired member’s
position number (1 to 19) to view the other
members of the telephone list.
5 When you stop on a
member of the list, the
display alternates
between showing the
member’s name and
telephone number.
Alternates between
and
6 Press the select key to enter edit mode.
7 A short press enables
the editing of the
telephone number. The
display shows the
current member’s
telephone number.
8 A long press enables the
editing of the member’s
name. The display
shows the current
member’s name.
POLICE DEPT
5556213
5556213
POLICE DEPT