B-6 Computer Group Literature Center Web Site
Connector Pin Assignments
B
CPU Debug Connector – J1
One 190-pin Mictor connector with center row of power and ground pins
is used to provide access to the Processor Bus and some miscellaneous
signals. The pin assignments for this connector are as follows:
Table B-5. Debug Connector Pin Assignments
1 PA0 GND PA1 2
3PA2 PA3 4
5PA4 PA5 6
7PA6 PA7 8
9PA8 PA9 10
11 PA10 PA11 12
13 PA12 PA13 14
15 PA14 PA15 16
17 PA16 PA17 18
19 PA18 PA19 20
21 PA20 PA21 22
23 PA22 PA23 24
25 PA24 PA25 26
27 PA26 PA27 28
29 PA28 PA29 30
31 PA30 PA31 32
33 PAPAR0 PAPAR1 34
35 PAPAR2 PAPAR3 36
37 APE# RSRV# 38
To Next Page
Loading...
