Motorola MVME2400 Series - MVME2400 Base Board Preparation; Table 1-3. Jumper Settings

MVME2400 Base Board Preparation
http://www.motorola.com/computer/literature 1-7
1
MVME2400 Base Board Preparation
Figure 1-1 illustrates the placement of the switches, jumper headers,
connectors, and LED indicators on the MVME240x. Manually
configurable items on the base board are listed in the following table. Refer
to the sections or figures listed along side the jumper function for more
information.
The MVME240x has been factory tested and is shipped with the
configurations described in the following sections. The MVME240x
factory-installed debug monitor, PPCBug, operates with those factory
settings.
Table 1-3. Jumper Settings
Jumper Function
J8 Flash Bank Selection (J8) on page 1-9
J9 System Controller Selection (J9) on page 1-9
S3 Software-Readable Header (SRH) Switch (S3) on page 1-10