EasyManua.ls Logo

Motorola MVME2400 Series - Table 4-3. Classes of Reset and Effectiveness

Motorola MVME2400 Series
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programming Considerations
http://www.motorola.com/computer/literature 4-9
4
7. VMEbus Reset sources from the Universe ASIC (PCI/VME bus
bridge controller): the System Software reset and Local Software
reset
Note On the MVME2400, Watchdog Timer 2 is a source of reset only
if component R25 is installed on the board. Consult your local
Motorola Computer Group (MCG) sales representative if this
feature needs to be enabled.
Table 4-3 shows which devices are affected by the various types of resets.
For details on using resets, refer to the MVME2400 Series VME Processor
Module Programmer’s Reference Guide.
Table 4-3. Classes of Reset and Effectiveness
Device Affected Processor Hawk
ASIC
PCI
Devices
ISA
Devices
VMEbus
(as system
controller
Reset Source
Power-On reset
√√√√√
Reset switch
√√√√√
Watchdog reset
√√√√√
VME
SYSRESET
signal
√√√√√
VME System SW
reset
√√√√√
VME Local SW reset
√√√√
Hot reset (Port 92)
√√√√
PCI/ISA reset
√√

Table of Contents

Related product manuals