38
6802982C85-C
Configuration for ML910 Laptop
You can use all the above configurations for the display connected to the ML910 laptop. If
the display is connected to the ML910 docking station (so called MODS option), it's
recommended to configure the display as follows:
• POWER UP PREFERENCES: USB 5V PRESENCE = DISABLE, POWER BUTTON = ENABLE
• DISPLAY POWER UP OPTIONS = WAIT or IGNORE
• POWER OFF PREFERENCES: CPU REQUEST = ENABLE, USB 5V ABSENCE = DISABLE, POWER
BUTTON = ENABLE
• POWER OFF EVENT = ENABLE
This configuration will allow to turn the ML910 on and off from the display power button.
Attaching/detaching of the ML910 to/from its docking station will not change the power state
of the display.
To Next Page
Loading...
