Motorola MXP600 - Changing the USB Settings Mode

Option Actions
• To turn on or off backlights by pressing a
function button, select Semi Auto.
• To keep backlights on, select On.
Defining accessories connected to
a car kit
a Select Accry Setup.
b Select one of the following options:
• GCAI Accessory
• Visor Microphone
• External Speaker
NOTE: Visor microphones and external
speakers must be configured to operate
your radio with a car kit.
19.16
Changing the USB Settings Mode
USB Settings allows you to set the mode that your radio enters when connected to a computer.
Prerequisites:
Your radio only supports the following characters to compose file names:
• Numeric digits
• English alphabetic characters
• Space
• Non-alphabetic characters: ! # $ % & ' ( ) - @ ^ _ ` { } ~.
NOTE: Before using non-alphabetic characters, ensure that your computer system supports
them.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→USB Settings.
3 Press Change.
4 Select one of the following options:
Option Description
Mass Storage Manage pictures that are stored in the internal flash mem-
ory or microSD card on a computer. Installing additional
applications is not required. When you connect your radio
to the computer, you can manage pictures from the My
Pictures and My Received Files folders.
Peripheral Equipment Inter-
face (PEI)
Enables communication with your radio using standard
protocols from the European Telecommunications Stand-
ards Institute (ETSI). You can manage pictures, radio set-
tings, and services. This mode provides access for exter-
nal applications.
MN006360A01-AE
Chapter 19: Setup
121