Motorola MXP600 - Using Select Net Registration; Using any Network Registration; Talkgroup Network Select; Selecting Your Talkgroup Network

29.2.2
Using Select Net Registration
Use this feature to migrate to another predefined network when you are out of the range of your
network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→Network Sel→Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
29.2.3
Using Any Network Registration
Use this feature when your radio loses the home network coverage and you want to increase the
number of networks it can scan and register.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→Network Sel→Any Network.
Your radio selects and registers to the network automatically from the predefined list.
29.3
Talkgroup Network Select
The Talkgroup Network Select sub-menu allows you to select one or multiple networks to register your
radio accordingly to the selected talkgroup.
29.3.1
Selecting Your Talkgroup Network
NOTE: TG Net Sel is available when the selected talkgroup is a Any Net talkgroup or a
InterSystem Interface (ISI) talkgroup, otherwise your radio display Service Restricted
message.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→TG Net Sel→Home Only.
Your talkgroup registers to the home network.
29.3.2
Using Select TG Net Registration
When and where to use:If the talkgroup selected is an Any Net talkgroup, this menu displays multiple
networks allowed for registration. If the talkgroup selected is an ISI talkgroup, this menu displays
MN006360A01-AE
Chapter 29: Networks
149