Motorola MXP600 - Viewing Network Information; Viewing the MAC Address; Viewing Certificate Enrollment Status

Procedure:
1 From the home screen, press the Menu key.
2 Select Wi-Fi→Network List.
3 From the list of predefined networks, highlight the required network.
NOTE: The Network List lists all predefined networks. However some of the listed
networks may not be within Wi-Fi range of your radio.
4 Press Connect.
When your radio is connected to the network, the display shows a positive notification.
33.4
Viewing Network Information
Prerequisites:Connect to a network.
Procedure:
1 From the home screen, press the Menu key.
2 Select Wi-Fi→Network Information.
The display shows information of the connected network.
33.5
Viewing the MAC Address
Procedure:
1 From the home screen, press the Menu key.
2 Select Wi-Fi→MAC Address.
The display shows the MAC address of the Wi-Fi chip.
33.6
Viewing Certificate Enrollment Status
The certificate enrollment validates your radio to be able to use certain radio features such as Wi-Fi
OTAP or 802.1x EAP-TLS.The certificate enrollment only needs to be performed one time, and
automatically starts when you first configure and connect your radio Wi-Fi to an access point with
internet connection. Your radio is already preloaded with the required root certificates and settings for
the enrollment.
Prerequisites:
Turn on Wi-Fi.
When and where to use:To check the status of the certificate enrollment.
Procedure:
1 From the home screen, press the Menu key.
2 Select Wi-Fi→Cert. Management.
MN006360A01-AE
Chapter 33: Wi-Fi
160