EasyManua.ls Logo

Motorola MXP600 - Charging the Battery; Figure 4: Desktop Charger

Motorola MXP600
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.5
Charging the Battery
You can charge a battery separately or attached to your radio. When charging a battery attached to
your radio, your radio must be turned off. The battery charges faster when your radio is turned off.
IMPORTANT:
Use only Motorola Solutions approved-chargers which provide optimal performance. Using
other chargers may fail to fully charge, or can reduce the life of the battery.
Do not charge the battery in a hazardous area.
Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to a power source according to the specification of the charger.
NOTE: The charger must be connected to a power outlet that is nearby and easily
accessed.
2 Depending on the type of charger, use one of the following options:
Option Actions
Using desktop chargers
a Insert the battery or your radio with a battery into
the slot of the charger.
b Ensure that the battery or radio is connected to the
charger.
c Ensure that the LED indication on the charger
shows that charging is in progress.
Using travel or car chargers
a Connect the charger to your radio with the battery
attached.
b Ensure that your radio indicates that charging is in
progress.
Figure 4: Desktop Charger
MN006360A01-AE
Chapter 4: Getting Started
39

Table of Contents

Other manuals for Motorola MXP600

Related product manuals