Motorola MXP600 - Table 14: General Icons

Icon Name Description
Direct Mode Your radio is in Direct Mode, a radio-to-radio commu-
nication.
Repeater Mode Your radio is operating as a repeater in Repeater
Mode.
DMO Repeater
Communication
Mode
The Repeater option in DMO Mode is selected.
• Solid – Your radio detects the repeater. For exam-
ple, your radio receives a presence signal.
• Blinking – Your radio does not detect the repeater
yet or attachment is happening.
• No icon – Radio-to-radio and gateway communi-
cation.
The GW + Rep option in DMO Mode is selected.
Solid – Your radio detects the repeater and the re-
peater icon is solid. Your radio detects the gateway
and the In Service icon is solid. For example, your
radio receives a presence signal.
Table 14: General Icons
Icon Name Description
All Ring Tones Off
• The volume is set to zero when Volume Adj. Mode is set to
Common.
• Both Simplex and Duplex ring volume is set to zero when
Volume Adj. Mode is set to Individual.
Simplex Ring Mut-
ed
• The Simplex ring volume is set to zero.
• Duplex ring volume is set to more than zero.
Duplex Ring Muted
• The Duplex ring volume is set to zero.
• The Simplex ring volume is set to more than zero.
Vibrate Only To alert you of an incoming message, your radio vibrates.
Vibrate then Ring To alert you of an incoming message, your radio vibrates and
then rings.
Low Audio The audio is set to a minimum level.
NOTE: You can set different icons (A to E) for audio
profiles.
High Audio The audio is set to a maximum level.
NOTE: You can set different icons (A to E) for audio
profiles.
Permanent Disable
in Car Kit.
Audio is disabled in the car kit.
Earpiece Connec-
ted
An earpiece is connected to your radio.
MN006360A01-AE
Chapter 7: Icon Indications
52