Motorola MXP600 - Enabling Network Monitor; Setting Monitor Option

Option Actions
To use the first available repeater for that
talkgroup
Select Repeater.
To use the first available gateway or re-
peater for that talkgroup
Select GW + Rep.
To use the first available gateway for that
talkgroup
Select Automatic.
To use a gateway with the specified gate-
way address for that talkgroup
a Select Specific.
b If your radio displays Selected Gate-
way: None, press Edit to enter the cur-
rent gateway address.
NOTE: When your radio cannot communicate with the gateway and repeater even if a
talkgroup to use them is configured, your radio attempts MS-MS communication.
When your radio detects the gateway, repeater, or both, the respective icon appears solid.
10.3
Enabling Network Monitor
Procedure:
1 From the home screen, press Options.
2 Select Network Monitor.
10.4
Setting Monitor Option
Procedure:
1 From the home screen, press Options.
2 Select Monitor.
3 Select one of the following options:
Option Description
Off Your radio works as a repeater only without operation.
Receive Only To listen only.
Receive&Transmit To listen and transmit by pressing the PTT button.
MN006360A01-AE
Chapter 10: Operation Modes
73