Motorola MXP600 - Making Calls from Messages; Calling Numbers from Messages; Making Group Calls on the Talkgroup of the Message Sender; Receiving Calls on the Radio

11.2
Making Calls from Messages
You can call a number embedded in the message in the Inbox or Outbox folder or start a group call
with the message sender of a talkgroup using the Embedded Number feature. The Embedded Number
feature is enabled by your service provider.
Calling Numbers from Messages
When and where to use:To return a voice call to the sender of a message or to any number that is
embedded in the message text.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
The radio displays a list of numbers, including the number of the sender.
5 To call, select the required number and do one of the following:
• Press the PTT button.
• Press the Send key.
6 Press Ctype to select one of the following type of calls:
• Private
• Phone
• PABX
7 Do one of the following to initiate the call:
• Press the PTT button.
• Press the Send key.
Making Group Calls on the Talkgroup of the Message Sender
When and where to use:To make a group call with the message sender of a talkgroup.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Select the required message and press the PTT button.
11.3
Receiving Calls on the Radio
Procedure:
Receive calls by using one of the following options:
Option Actions
Group Call in Idle To respond, press and hold the PTT button.
MN006360A01-AE
Chapter 11: Types of Radio Calls
76