Option Actions
c Enter the recipient number or choose from contacts
by pressing abc.
NOTE:
For Private target selection, you can enter
either Individual Short Subscriber Identity (IS-
SI), Individual TETRA Subscriber Identity (IT-
SI), or Group Short Subscriber Identity (GSSI)
of the recipient.
ISSI or ITSI is a unique and individual ID as-
signed to each radio.
GSSI in Dimetra is called Group ID or Talk-
group ID.
Sending Messages to Groups
a Create a message and press Send.
b Select Group.
c Select a group that you want to send the message
to.
Sending Store and Forward
Messages
a Press the Menu key and select Message Set-
up→On/Offline users.
b Create a message and press Send.
c Select Private or Phone.
d Enter the recipient number or choose from contacts
by pressing abc.
4 Perform one of the following actions:
• Select Send.
• Press the Send key.
• Press the PTT button.
14.1.2
Configuring Delivery Reports
Prerequisites:Contact your service provider to enable Delivery Reports.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→New Message.
3 Press Menu key and select Delivery Report.
4 Select one of the following options:
Option Description
None No delivery reports are required.
Received Delivery reports are required when the recipient receives
your messages.
MN006360A01-AE
Chapter 14: Messages
85
To Next Page
Loading...
