Motorola MXP600 - Entering the Call-Out Box

Option Actions
• Press the PTT button.
• Press the Send key.
Invoking the edit screen with an
old message and send it to a
different recipient
a Select Forward and edit the text.
b To send, perform one of the following options:
• Select Send.
• Press the PTT button.
• Press the Send key.
Refreshing the list of messages
to display new messages
Select Refresh.
Displaying the date and time of
the message when it is in one of
the following status:
• Sent
• Delivered
• Read
• Expired and undelivered
• Expired and unread
• Failed due to an unknown er-
ror
Select Delivery Status.
NOTE: Applicable only for Outbox.
Protecting the message and
avoid deleting or overwriting it
Select Protect.
Removing protection from the
message
Select Unprotect.
NOTE: Message protection is enabled in
the Inbox and Call Out Inbox. You can only
delete unprotected messages.
14.5
Entering the Call-Out Box
The Call-Out (CO) Box contains incoming and outgoing Call-Out messages. Your radio plays a Call-
Out tone according to the configured indication profile. The indication profile is configured based on the
severity level of a matching Group Short Subscriber Identity (GSSI) and Sub-Address Group Call-Out.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→CO Box.
MN006360A01-AE
Chapter 14: Messages
89