227
UPnP settings
set upnp option [ on | off ]
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT port maps.
This means that applications that support UPnP, and are used with a UPnP-enabled Motorola Netopia
®
Gateway, will not need application layer gateway support on the Motorola Netopia
®
Gateway to work
through NAT. The default is on.
You can disable UPnP, if you are not using any UPnP devices or applications.
set upnp log [ off | on ]
Enables or disables UPnP logging.
set upnp read-only [ off | on ]
Enables or disables
DSL Forum settings
TR-064 is a LAN-side DSL CPE configuration specification and TR-069 is a WAN-side DSL CPE Manage-
ment specification.
TR-064
DSL Forum LAN Side CPE Configuration (TR-064) is an extension of UPnP. It defines more services to
locally manage the Motorola Netopia
®
Gateway. While UPnP allows open access to configure the Gate-
way's features, TR-064 requires a password to execute any command that changes the Gateway's con-
figuration.
set dslf-lanmgmt option [ off | on ]
Turns TR-064 LAN side management services on or off. The default is on.
To Next Page
Loading...
