229
Remote Management settings
set remote-mgmt telnet-enable [ on | off ]
Enables or disables remote management via telnet of the network specified by
network-
n
/netmask-
n
. Up to 10 networks may be specified.
set remote-mgmt web-enable [ on | off ]
Enables or disables remote management via web UI of the network specified by
network-
n
/netmask-
n
.
set remote-mgmt snmp-enable [ on | off ]
Enables or disables remote management via SNMP of the network specified by
network-
n
/netmask-
n
.
set remote-mgmt [ network-1... network-10 ]
ip_addr
Specifies the IP address for the network, 1 – 10, to be remotely managed.
set remote-mgmt [ netmask-1... netmask-10 ]
netmask
Specifies the subnet mask for the network, 1 – 10, to be remotely managed.
To Next Page
Loading...
