Multimedia Messages
Attaching New Pictures, Videos, and
Voice Records
While you are creating a message, you can take
pictures, record videos, or create voice records
and attach them to the message.
Taking a New Picture
1 While you are creating a message, scroll to any
message field and press m. -or-
Select Attach > [New Attachment].
2 Select Capture Picture. This accesses the
camera.
3 If you want to adjust the zoom, lighting, picture
quality, picture size, or a timer, set these options.
See “Setting Picture Options” on page 137.
4 Aim the camera lens on the flip. Use the internal
display as the viewfinder.
5 When the image you want to capture is in view,
press and release O or press and release A
under Capture.
6 When the you have captured the picture you
want to attach to your message, press and
release O or press and release A under Save.
-or-
To discard the picture, press A under Discard.
You can then take another picture.
7 When you are finished, press A under Done if
Done is one of your options.
The picture is attached to the message and saved
to the default storage location.
Recording Video
1 While you are creating a message, scroll to any
message field and press m. -or-
Select Attach > [New Attachment].
2 Select Record Video. This accesses the video
recorder.
3 If you want to adjust lighting:
Press m.
Select Spotlighting.
Select On or Off.
4 Aim the camera lens on the flip. Use the internal
display as the viewfinder.
5 If you want to zoom in or out, scroll up or down.
If you want to change the image size, scroll left
or right.
6 When you are ready to record, press and
release c, press and release O, or press and
release A
under Record. Releasing the key
starts the recording.
7 If you want to end the video, press c or press A
under Stop.
To Next Page
Loading...
