26
Help
General What is the
significance of
LED?
The LED indicates the
following status:
LED flashing Red: Your Camera
is booting up. After a voice
prompt the camera is booted
up and ready for pairing.
LED Cycling Blue/Red: Your
camera is in pairing mode.
LED Solid Blue: The camera
is paired and set up to your
account.
LED Flashing Blue: The
camera is live streaming.
LED Off - No Power to
camera.
Connec-
tivity
issues
I am not able
to access my
Camera.
Please check if the Camera is
within Wi-Fi
®
range. Please try
to move the Camera closer to
the router for better Wi-Fi
®
connectivity and try again.
Setting Up During setup on
devices for An-
droid™ and iOS,
I am not able to
find my Camera
during the last
step and the setup
fails.
Please reset the Camera to
setup mode and try again.
Press and hold the PAIR but-
ton on the back of the camera
using the tool provided until
you hear a beep and voice
prompt ‘Ready for pairing’.
When the Camera LED is o,
this indicates that it is in setup
mode. Now restart the setup
from your smartphone again.
To Next Page
Loading...
