Motorola PHOTON 4G - Connecting Your Phone to Your Computer

2F. microSD Card and File Transfer 55
microSD Card and File
Transfer
Connecting Your Phone to Your
Computer
You can connect your phone to a computer with a USB
cable.
1. With a memory card inserted, and your phone
showing the home screen, connect a Motorola
micro USB data cable from your phone’s micro
USB port to a USB port on your computer. Your
phone should show in the status bar.
2. On your phone, flick down the status bar to see the
USB connection options.
3. Touch an option and then touch OK .
䡲 Motorola Phone Portal : Connect your phone and
computer with a cable or a Wi-Fi network to share
files through an easy-to-use home screen.
䡲 Windows
®
Media Sync : Share media files between
your computer and phone.
䡲 USB Mass Storage : Drag and drop files between
your computer and memory card folders. When
you’re done, use “Safely Remove Hardware”
before disconnecting the USB cable.
䡲 Charge Only : Use the connection only to charge a
device.
Note: The first time you use a USB connection, your
computer may indicate that drivers are being installed.
Follow any prompts you see to complete the
installation. This may take a few minutes.
Note: Make sure to connect the phone to a high power USB
port. Typically, these are located directly on your
computer.
Note: This device can be administered through Microsoft
Exchange server security policies. Additional security
policies may be applied to your device depending on
rules set by your company.
Note: You can’t use the files on your memory card with your
phone while it is connected to the computer.