Motorola PM1500 - Page 70

ALERT TONES
Action LED Condition Meaning
Short, low
pitched tone
Unsuccessful
power-up. Radio
failed self-test.
Radio not ready
for use.
Contact your
service
representative.
Invalid (bad) key
press. A key
press was
rejected.
Time-out timer
warning.
Transmission
time will expire in
four seconds.
Short, medium
pitched tone
Valid (good) key
press. A key
press was
accepted
Pressed
emergency
button to enter
emergency.
Emergency
entered.
Short, high
pitched
tone
Successful
power-up. Radio
passed self-test.
Group of four
medium pitched
tones
every five
seconds
Call Alert (page)
received.
Continuous, low-
pitched tone
Transmit on
receive only
mode. Pressed
PTT button on
receiving mode.
Release PTT
button.
Transmit inhibit
on busy mode.
Pressed PTT
button while
mode was busy.
Invalid mode. An
invalid or
unprogrammed
operation.
Time-out timer
timed out.
Transmission
was terminated.
Release PTT
button
Continuous,
medium pitched
tone
Emergency
alarm/call exit.
Exiting.
Faint beeping
tone every 10
seconds
Failsoft (trunked
systems only).
Single, medium
pitched tones
followed by
group of four
medium pitched
tones
Your page has
been received by
the target radio.
Group of two
medium pitched
tones
Selective Call
received.
Action LED Condition Meaning