7
English
Figure 3: Lifting the radio from the charger
4. To charge a battery, insert the battery into the charger’s pocket by
(see Figure 4 and Figure 5):
a. Aligning the raised tab on each side of the battery with the
corresponding groove on each side of the charger pocket.
b. Pressing the battery toward the rear of the pocket.
c. Sliding the battery into the charger pocket, ensuring complete
contact between the charger and battery contacts.
d. When the battery is properly seated in the pocket, the RED LED
illuminates to indicate that the battery is charging rapidly.
e. The LED will change to a STEADY GREEN light to indicate that
the battery is fully charged.
To Next Page
Loading...
