GETTING STARTED
Getting Started
12
English
Attaching the Dust Cover
1. Place the dust cover loop over the attached
antenna.
2. Slide the loop all the way down to the base of
the antenna.
3. Insert the dust cover tab into the slot above the
connector.
4. Tighten the thumbscrew to hold the cover in
place. DO NOT overtighten the thumbscrew.
Dust Cover
Loop
Dust Cover
Tab
Slot for
Dust Cover Tab
Thumbscrew
#PTX760.book Page 12 Thursday, June 3, 1999 6:16 PM
To Next Page
Loading...
