PROGRAMMING
FEATURES
English
51
button B and the cursor is positioned in a valid
character, the button B will delete the current
character and replace it with a blank space.
• Use the / buttons to change the current
selected character to the next ASCII value in
alphabetical order (from A to Z). The
characters will be uppercase letters.
• To toggle character between uppercase and
lower case, press the A button. Note that the
supported lower case characters are: b, c, d,
g, h, i, l, o, r, u.
• Pressing the C button will allow you to insert
special characters and numbers in the
following order: 0 - 9 * {}? &%. + / - _ ' ' \.
Character ' ' is a space character.
• Long press the PTT button to save and go
back to the ‘Channel Aliasing Selection Mode’
to choose other channel to edit the alias name
or exit without saving changes by turning OFF
the radio.
Notes:
• If the channel alias name is left blank, the
radio will play a bad key chirp and will stay in
the editing menu mode until the channel name
is edited and saved.
• When editing the channel alias name, if the
radio is left idle after 3 seconds, the radio will
accept the existing character and advance the
cursor one space to the right.
BRUS_display.book Page 51 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
