Motorola RS507 - Unpacking the Imager

4 RS507 Hands-Free Imager
Unpacking the Imager
After opening the shipping box, inspect the contents. You should have received
the following:
NOTE
- Standard Range (SR): The SR focusing is used to maximize the far reading
distance and is the standard offering on all mobile computing products using same
imager. The SR focusing is not specified to read 5 mil code 128 or 6.6 mil Databar
and is thus inadequate for applications that have these somewhat higher density
reading requirements. This is the default configuration and the configuration of choice
where the far reading range is more important than the ability to read high density
symbols.
- Driver License (DL): The DL focusing is optimized for reading all drivers license
and is also specified to read higher density codes such as 5 mil code 128 and
Databar and 5 Mil PDF417. As a result it has a slightly reduced range on EAN/UPC
codes (typically 12" on photographic quality symbol). This is the preferred
configuration where the ability to read these higher density codes is more important
than range on medium or low density codes (10 mil and above). DL is recommended
in electronics, pharmacy or when handling small items.
Inspect the equipment for damage. If you are missing any equipment or if you find
any damaged equipment, contact Motorola Enterprise Mobility Support
immediately. See Service Information on backcover for contact information.
Model
yy:
IM = SR focus
DL = DL focus
Description
Standard Battery
Extended Battery
Corded Adapter
Trigger
Quick Reference Guide
RS507-yy2xxxxSTWR Cordless, triggered RS507 with
standard battery
RS507-
yy 2xxxxSNWR Cordless, triggerless RS507 with
standard battery
RS507-
yy 2xxxxENWR Cordless, triggerless RS507 with
extended battery.
RS507-yy2xxxxCTWR Corded and triggered RS507
RS507-yy2xxxx0TWR Cordless, triggered RS507 with
no battery