Motorola S1201 - Getting started; Connecting the base and handset; Connecting the charger and charging the handset

4
2. Getting started
Connecting the base and handset
1. Plug the telephone line cord into the socket marked on the rear of the
base.
2. Plug the power adaptor into the socket marked on the rear of the base
and plug the other end into the wall socket. Switch on the power supply.
Connecting the charger and charging the handset
To close:
To open:
1
2
Use your finger
to unclip the
cover and lift up.
Position the
battery cover
as shown.
Lower the cover
and clip into place.
Insert your
finger here.
Getting started