124 Using Message Services
Managing Outgoing Messages
You can create a new message and send it
immediately, or store it in an outgoing messages list
for later use. You can also edit a message that you
have received, then send and/or save the modified
message. Messages are created and edited in the
message editor.
Message Editor
The message editor lets you create a new message
or modify a (received or outgoing) stored message.
You use the keypad to create or edit a message. You
can produce any letter in the alphabet by pressing
the appropriate key. For example, press
2
to
enter the letters A, B, or C, as shown:
For a complete list of the characters you can enter
from the keypad, see page 76.
Note: This feature must be activated by your service
provider. Contact your service provider for additional
information.
*HWWLQJWR0HVVDJH)HDWXUHV
1. Press
?
to go directly to the Messages menu.
or
Press
M
until you see
Messages
, and then press
O
.
2. Press
M
to scroll to one of the features described below. You
will see the feature name, followed by
Select?
.
press 1 time to insert an A
press 2 times to insert a B
press 3 times to insert a C
press 4 times to insert a 2
To Next Page
Loading...
