56 Using In-Call Features
Placing a Call on Hold
Note: You must subscribe to this network feature
through your service provider. Contact your service
provider for additional information.
You can place a call on hold to receive a new call or
while making a new call. You can only place one call
on hold at a time, so some options may not be
accessible if you have already placed a call on hold.
To place a call on hold:
1. Press
M
until you see
Hold Call
.
2. Press
O
. Your current call is put on hold and
you will see
Call Holding
followed by
Reconnect?
.
Once your call is on hold, you have these options:
If you want to... Then...
make a new call
1. Press
M
until you see
Make
New Call
, and then press
O
to select.
2. Dial the number as usual, and
then press
O
to place the
call.
switch between
calls
When you are connected to either
number, you will see
2 Calls
followed by
Switch?
.
Press
O
to switch to the other
call and automatically place the
current call on hold.
end both calls
Press
M
until you see
End Active
& Held Call
, and then press
O
to select.
Both calls are disconnected, and
the display returns to standby.
end current call Press
C
at any time.
To Next Page
Loading...
