Installation and Operation 3-7
SURFboard Cable Modem Installation Manual
8
If the computer does not locate the driver, the previous window is displayed again. Select
Specify a location and type the location of your CD-ROM drive:
In this example, to load the driver successfully, you may need to click Browse to manually
select the NetMotCM.sys files on the CD-ROM.
9 Click Next to display the following window:
10 Select the updated driver... and click Next.
If the window above is not displayed, verify that the SURFboard Cable Modem CD-ROM is
properly inserted in the CD-ROM drive. If you still cannot find the correct driver file, click
Cancel to cancel the installation and perform the procedure for “Removing the USB Driver
from Windows 98 or Windows Me” on page 3-33 and then repeat this procedure.
To Next Page
Loading...
