3-12 Installation and Operation
SURFboard Cable Modem Installation Manual
7
Click Next and the window shown below is displayed:
Although your SURFboard cable modem model number may be different than in the images
in this manual, the procedure is the same
.
8
Click Next. If the Insert Disk window is displayed, be sure the SURFboard Cable Modem
CD-ROM is in the CD-ROM drive and follow steps 8 to 12. Otherwise, you can skip to
step 12.
9 On the Insert Disk window, click OK. The following window is displayed:
10 If necessary, select your CD-ROM drive in the Copy files from list.
To load the driver successfully, you may need to click Browse to manually select the
NetMotCM.sys file on the CD-ROM.
To Next Page
Loading...
