3-28 Installation and Operation
SURFboard Cable Modem Installation Manual
3
Type winipcfg.exe and then click OK. The IP Configuration window is displayed:
In Windows 98, IP Autoconfiguration should not be shown before IP address or an error
condition exists. An example is shown below.
The values shown for Adapter Address, IP Address, Subnet Mask, and Default Gateway on your PC will be different from those
shown in the examples.
If an IP address is not displayed or has all zeros in Windows 95, an error condition exists.
If Autoconfiguration is displayed before IP Address in Windows 98, an error condition exists.
4
Select the adapter — the Ethernet card or USB device.
5 Click Renew.
6 After the system displays an IP address, click OK.
To Next Page
Loading...
