B-22 Event Log Messages
SURFboard Cable Modem Installation Manual
Code Event Log Messages Level Cable Modem Actions
M554.0
Error setting read string for SNMPv3
access
4 (Error) No action taken SNMPv3 won’t work
M555.0
Error setting write string for SNMPv3 4 (Error) No action taken SNMPv3 won’t work
M556.0
Error setting notify string for SNMPv3 4 (Error) No action taken SNMPv3 won’t work
M557.0
Error creating SNMPv3 2275 view 4 (Error) No action taken SNMPv3 won’t work
Acquisition
Code Event Log Messages Level Cable Modem Actions
T500.0
Acquired Upstream SUCCESS 7 (Info)
T501.0
Acquired Downstream [Curr Freq in Hz]
SUCCESS
7 (Info)
T502.0
Scan Downstream [Curr Freq in Hz] for
[enum] time with status [status enum]
8 (Debug) No action taken
T503.0
Acq DS [Curr Freq in Hz] with status
[status string]
8 (Debug) No action taken
T503.1
Acquire US with status [status string]
powerLevel [value] tempSid [SID]
8 (Debug) No action taken
T503.2
Move Downstream with status [status] 8 (Debug)
T504.0
Both Downstream & Upstream have been
changed
8 (Debug) No action taken
T505.0
Acquired Upstream with status [status
enum]
8 (Debug) No action taken
T506.0
Downstream Frequency has been
changed
8 (Debug) No action taken
T507.0
Received Async Error [UCC Type] 2 (Alert) Shutdown3220 and reset the board.
T508.0
Fail to Acquire Upstream. Error Stats
[statnum], Retry [num]
4 (Error) After received a UCC-REQ to change
upstream, attempt to acquire
upstream with new data and it failed.
Keep acquiring upstream until
success
T509.0
Acquired DS with status %s, DS Freq %d,
US Id %d
8 (Debug) No action taken
T510.0
Acquire DS after RR Chg with status
[status]
8 (Debug) No action taken
To Next Page
Loading...
