Motorola SE4750 - Performance Specifications

3 - 6 SE4750 Integration Guide
Technical Specifications
Table 3-6 SE4750 Technical Specifications
Item Description
Power Requirements - Input Voltage
See
Supply Currents VCC =
VCC_ILLUM = VDD_IO_HOST = 3.3V
@ 23C
VCC: 3.3V +/- 0.3V
VCC_ILLUM: 3.0V to 5.5V
VDD_IO_HOST 1.7 to 3.6
Maximum Sensor Power Supply Noise
(at 23° C)
100 mVp-p (3.3 V, 10 Hz - 100 kHz) for decoding
30 mVp-p (3.3 V, 10 Hz - 100 kHz) for image capture
Optical Resolutions SR focus: 3.0 mil (Code 39), 5.0 mil (PDF417)
Specular Dead Zone
Illumination On
Illumination Off
Up to 20º depending on target distance and substrate glossiness
None
Skew Tolerance ± 60º (see
Figure 3-5 on page 3-11 )
Pitch Angle ± 60º (see
Figure 3-5 on page 3-11 )
Roll 360º (see
Figure 3-5 on page 3-11 )
Ambient Light Immunity (Sunlight) 10,000 ft. candles (107,639 lux)
Imaging Sensor
Image Resolution
Field of View (FOV)
1280 horizontal X 960 vertical pixels
48.0º horizontal, 36.7º vertical
Focusing Distance from Front of Engine
SR
177.8 mm / 7.0 inches
Laser Aiming Element
Visible Laser Diode (VLD)
Central Dot Optical Power
Pattern Angle
655 ± 10 nm
0.6 mW (typical)
48.0º horizontal, 38.0º vertical
Illumination System
LEDs
Pattern Angle
Warm white LED
80° at 50% intensity
Shock 2000 G ± 5% applied via any mounting surface at -30º and 60º C for a
period of 0.85 ± 0.10 msec
2500 G ± 5% applied via any mounting surface at 23º C for a period of
0.70 ± 0.10 msec