5 - 2 SE4750 Integration Guide
PICKLIST_MODE 0x7B Sets the rate of picklist frames.
PING 0x7A Used for test purposes.
POWER_MODE 0x5F Places the SE4750 in low power mode.
RD_SENSOR 0x51 Reads the Aptina AR0134 registers.
RESET 0x57 Returns engine components to a default state.
TIME_TO_LOW_POWER 0x75 Sets the length of time the SE4750 is idle before
entering low power mode.
WR_SCRIPT 0x76 Programs more than one SE4750 command into one
script.
WR_SENSOR 0x50 Writes to the Aptina AR0134 registers.
Table 5-1
SE4750 Command List (Continued)
I
2
C Command Set Opcode Description
To Next Page
Loading...
