Motorola SLVR L6 - Customization; Ring Style and Alerts

40
basics
codes & passwords
Your phone’s 4-digit unlock code is originally set to 1234 .
The 6-digit
security code is originally set to 000000 . If your
service provider didn’t change these codes, you should
change them:
Find it: Press - > Settings > Security > New Passwords
If you forget your unlock code: At the Enter Unlock Code prompt,
try entering 1234 or the last four digits of your phone
number. If that doesn’t work, press
- and enter your 6-digit
security code instead.
If you forget other codes: If you forget your security code,
SIM PIN code or PIN2 code contact your service provider.
lock & unlock phone
You can lock your phone to keep others from using it. To lock
or unlock your phone, you need the 4-digit unlock code.
To
manually lock your phone: Press - > Settings > Security
>
Phone Lock > Lock Now .
To
automatically lock your phone whenever you turn it off:
Press
- > Settings > Security > Phone Lock > Automatic Lock > On .
Note: You can make emergency calls on a locked phone (see
page 49). A locked phone still rings or vibrates for incoming
calls or messages,
but you need to unlock it to answer .