Motorola SLVR L7 - Removing and Replacing the Transceiver PC Board

24 September 23, 2005 6809495A77-O
Disassembly Motorola SLVR L7
Removing and Replacing the Transceiver PC Board
1. Remove the battery cover, battery, SIM, and rear housing as described in the
procedures..
2. Insert the flat end of the disassembly tool under the flex connector to unseat
it from the transceiver PC board (see Figure 10)..
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
050975o
Figure 10. Removing the Transceiver PC Board Connectors
Keypad PC board
Flex Connector
Coaxial Cable Connector
Transceiver PC board
Battery pogo pins
Display Flex Connector