6809495A77-O September 23, 2005 27
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the Camera Assembly
1. Remove the battery cover, battery, SIM, antenna, and transceiver PC board as
described in the procedures..
2. Use the disassembly tool to unseat the camera assembly flex connector from
the transceiver PC board assembly (see Figure 13).
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent ESD and component damage.
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
050980o
Figure 13. Removing the Camera Assembly
Camera connector
To Next Page
Loading...
