Motorola Smart Nursery 7 Quick Start Guide

UK EN
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Smart Nursery 7 System
MODEL:
Smart Nursery 7
A. Connect the Camera to the Power Supply.
• Connect the Micro USB plug of the power
adapter to the Camera and the other end to a
suitable mains power socket. The LED
charging indicator next to the ON/OFF
switch lights up in red.
• Slide the ON/OFF switch to the ON position.
The LED status indicator lights up in blue
initially, then changes to flashing red.
Insert Micro USB
plug
Slide to the ON
position to switch
on the camera
LED status indicator
LED charging
indicator
B. Connect the Smart Nursery Monitor to the Power Supply.
• Connect the Micro USB plug of the power
adapter to the Smart Nursery Monitor and the
other end to a suitable mains power socket.
• Press and hold the 0 POWER ON/OFF
button for 2 seconds to turn on the Smart
Nursery Monitor.
Insert Micro USB plug
0POWER ON/OFF
button
WARNING:
STRANGULATION
HAZARD: Children
have STRANGLED in
cords. Keep this
cord out of the reach
of children (more
than 1m away).
Never use extension
cords with AC
Adapters. Only use
the AC Adapters
provided.

Motorola Smart Nursery 7 Specifications

General

Brand	Motorola
Model	Smart Nursery 7
Category	Baby Monitor
Language	English