Introduction Installation Troubleshooting Glossary License
SBV5120 VoIP Cable Modem User Guide 11
Setting Up a USB Driver in Windows 98 Second Edition
1 Insert the SURFboard VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.
2 Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and
Startup for a Single User” on page 8. A few seconds after you complete the USB connection, the Add New
Hardware Wizard window is displayed:
3 Click Next. The following window is displayed:
To Next Page
Loading...
