Motorola Symbol LS1203 - Decode Feedback and Code ID Settings

User Preferences 4 - 7
Beep After Good Decode
Scan a bar code below to select whether or not the scanner beeps after a good decode. If Do Not Beep After
Good Decode is selected, the beeper still operates during parameter menu scanning and indicates error
conditions.
Transmit Code ID Character
A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is
decoding more than one code type. In addition to any single character prefix already selected, the Code ID
character is inserted between the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters,
see Symbol Code Characters on page B-1 and Aim Code Characters on page B-2.
*Beep After Good Decode
(Enable)
Do Not Beep After Good Decode
(Disable)
Symbol Code ID Character
AIM Code ID Character
*None