Symbol LS4278 Product Reference Guide14-24
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning a bar code from the
Alphanumeric Keyboard beginning on page 14-77.
If there is no match when the rule is interpreted and the rule fails, the next rule is checked.
Send Pause
Scan the bar code below to insert a pause in the transmission of data. The length of this pause is controlled by the value of the Pause
Duration parameter.
Send Pause
Skip Ahead
Use the following bar codes to skip ahead characters.
Move Cursor To Character
Move Cursor To Start
Move Cursor Past Character
Skip Ahead 1 Character
Skip Ahead 2 Characters
To Next Page
Loading...
