Motorola Symbol LS9208 - RS-232 Default Parameters and Host Types

6-4
Symbol LS9208 Product Reference Guide
Note:See Appendix A, Standard Default Parameters for all user
preferences, hosts, symbologies, and miscellaneous default
parameters.
Table 6-1. RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard
1
6-7
Baud Rate 9600 6-10
Parity None 6-12
Check Receive Errors Enable 6-14
Hardware Handshaking None 6-15
Software Handshaking None 6-18
Host Serial Response Time-out 2 Sec 6-21
RTS Line State Low RTS 6-23
Stop Bit Select 1 6-24
Data Bits 8-Bit 6-25
Beep on <BEL> Disable 6-26
Intercharacter Delay 0 msec 6-27
Nixdorf Beep/LED Option Normal Operation 6-29
Ignore Unknown Characters Send Bar Codes 6-30
1
User selection is required to configure this interface and this is the most common selection.