Motorola Symbol LS9208 - Page 505

A-3
Standard Default Parameters
Baud Rate 9600 6-10
Parity None 6-12
Check Receive Errors Enable 6-14
Hardware Handshaking None 6-15
Software Handshaking None 6-18
Host Serial Response Time-out 2 Sec 6-21
RTS Line State Low RTS 6-23
Stop Bit Select 1 6-24
Data Bits 8-Bit 6-25
Beep on <BEL> Disable 6-26
Intercharacter Delay 0 msec 6-27
Nixdorf Beep/LED Options Normal Operation 6-29
Ignore Unknown Characters Send Bar Codes 6-30
USB Host Parameters
USB Device Type HID (Human Interface
Device) Keyboard
Emulation
7-5
USB Country Keyboard Types (Country Codes) North American 7-8
USB Keystroke Delay No Delay 7-12
USB CAPS Lock Override Disable 7-13
Table A-1. Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.