Operating the MT2070/MT2090 2 - 25
Options...
Scroll to Options and press ENT to configure the inventory application. On this screen, set the file format and the
file storage location to save data. The format is specified in an xml file located in the folder \application\inventory.
Press the Up or Down Scroll key to move from field to field. Use the keypad to enter a value in the File: field; Press
the right or left Scroll key to change the data within all other fields.
Figure 2-23
Options Screen
•
File: Specify a file type.
•
Format: Specify a Text of XML file format.
•
Separator: Specify a delimiter (comma, semi-colon or tab).
•
Grouped: Select No if data is exported/transmitted in the order scanned; select Yes if data is
exported/transmitted by group.
•
Clear Delay:The time in seconds data is automatically cleared from the display after scanning.
•
Cancel: Press to cancel settings and return to previous screen.
•
Done: Press to save settings and return to previous screen.
About...
Displays information about the ScanInventory application.
Close
Scroll to Close and press ENT to exit and return Home.
To Next Page
Loading...
