Motorola Symbol MT2070 - Scan Inventory

2 - 28 Symbol MT2070/MT2090 User Guide
Scan Inventory
When Scan Inventory is selected on the Main Menu, the Scan Inventory screen displays (Figure 2-27). On this
screen the user must enter the location in which the inventory is scanned. When a location is not entered, two short
beeps sound indicating an error.
1. Use the keypad to enter a location and press ENT to continue.
Figure 2-27 Scan Inventory Screen
2. Upon pressing ENT, the Scan screen displays.
Figure 2-28 Scan Inventory Scan Screen
3. : Use the keypad to enter a quantity into this field. Scanning is disabled when this field is highlighted.
4. : Scan a bar code to enter data into this field. Scanned data in this screen is stored on the FFS file
system and can be viewed, deleted, or transmitted to MCL Link.