User Preferences & Miscellaneous Scanner Options 5 - 11
Picklist Mode
Parameter # F0h 92h
Picklist mode enables the device to decode only bar codes that are aligned under the laser crosshair. Select one of
the following picklist modes for the device:
•
Disabled Always - Picklist mode is always disabled.
•
Enabled in Hand-Held Mode - Picklist mode is enabled when the device is out of hands-free mode and
disabled when the device is in presentation mode.
•
Enabled in Hands-Free Mode - Picklist mode is enabled when the device is in hands-free mode only.
•
Enabled Always - Picklist mode is always enabled.
NOTE For the DS9808-LR/LL, if you configure Trigger B for Imager Decoding and enable Picklist Mode,
activating Trigger B turns on the imager aiming pattern, and releasing the trigger activates decoding.
*Disabled Always
(00h)
Enabled in Hand-Held Mode
(01h)
Enabled in Hands-Free Mode
(03h)
Enabled Always
(02h)
To Next Page
Loading...
